TRU-CUT
Tools that give you the Power to Create!
TRU-CUT TRACK
The perfect companion to our high quality sawmills and surfacers is one of the factory track options. Available in any length! The standard track is 30 feet long (allows cutting a 25 foot log or a 20 foot log if track is shared with a surfacer). No need for separate tracks if you have a mill and
surfacer. The equipment is designed to share a common track if desired. If you prefer to fabricate a custom track essential details can be supplied.
Build Your Mill & Surfacer with the Track length you need!
TRUCUT TRACKS
CONCRETE MOUNTED TRACK
These tracks are 6 inch x 17.25 pounds per foot “I” beams with caster rails welded on top, stop plates on ends, chain support hooks every 5 feet, base anchor plates and side braces every 7 to 8 feet, depending on track length. Comes complete with shims and anchor bolts ready to anchor to your slab.
The standard length is 30 feet, other lengths available.
TRUCUT TRACKS
GROUND TRACK
This is a super heavy duty track system with 8 inch x 31 pounds per foot “H” beams for main beams and 6 inch “I” beam log bunks spaced 3 foot on center. Track must be supported every 10 feet maximum (anchor plates are on 10 foot centers).
TRU CUT TRACKS
TRUCUT TRACKS
LOG BUNKS
Log Bunks – Made of heavy duty steel to carry the weight of heavy logs….
APPLICATION: Ground and Cement Mounted Track
CATEGORY: Options for Mills & Surfacer
PRICE: Request Price
TRUCUT TRACKS
LOG DOGS & SQUARE
Log dog and square arm – These heavy duty fold down square arms can be raised and lowered with a handle on the operator side of the mill and have a jamb bolt to hold them at the proper hieght. The log clamp slides over against the log on a 1.75 inch diameter stress-proof shaft with a binding action, then the cam action handle on the log dog securely clamps the log.
APPLICATION: Ground and Cement Mounted Track
CATEGORY: Opitons for Mills
PRICE: Request Price
TRUCUT TRACKS
SURFACER CLAMPS
These clamps are designed to bolt onto the “I” beam log bunks and have the ability to clamp wide surfaces.
APPLICATION: Ground and Cement Mounted Track
CATEGORY: Options for Surfacer
PRICE: Request Price
TRUCUT TRACKS
TRACK RISER
6 Inch Track Riser – 4 inch x 6 inch ¼ inch wall tubing with holes in the top to match track anchor plates and holes in the bottom for anchor bolts. This raises the tracks 6 inches making cleanup of sawdust and debris easier.
APPLICATION: Ground and Cement Mounted Track
CATEGORY: Options for Mills & Surfacer
PRICE: Request Price
TRUCUT TRACKS
TRACK SPACERS
These are a multi-purpose option for the concrete mount track. 8 inch x 8 inch x ½ inch bearing plates
are large enough for soft ground or can be bolted to concrete. The 4 inch x 4 inch cross tube can
support logs (additional bracing/support recommended) and raises the track 4 inches off the concrete/ground to facilitate cleaning of the track area. They also serve to accurately space the track rails while allowing disassembly and moving the track to a new site. Track spacers can be cheaper to ship than a ground bed.
APPLICATION: Cement Mounted Track
CATEGORY: Options for Mills & Surfacer
PRICE: Request Price