TRU-CUT
Sawmills & Surfacers

Tools that give you the Power to Create!

TRU-CUT  Surfacer Planes and Sands!

Want to create extraordinary slabs for Bar/Cabinet Tops, Tables & Furniture?
The Tru-Cut Slab Surfacers are designed to bring production speed to the surfacing and sanding process. Slabs can be flattened (can remove up to 3/4 inch per 12 inch wide pass) and smoothed (finish comparable to the best planers) in no time. Sanding can be accomplished with nearly the same speed (14 inch wide passes). At feed rates of 10 feet per minute a slab can be surfaced while your customer watches (surfacing times of 5-10 minutes and sanding times of 10-20 minutes are possible). In addition the surfacers can share a track with one of our mills or run on it’s own track.  Surface slabs in record time, minutes instead of hours. This is the Machine!

TRUCUT SURFACER

SS-70 SURFACER

35 hp Vanguard gas engine (complete with 6 gallon tank and fuel guage) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 70 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill. Infinitely variable track feed and cutterhead speed.

TRUCUT SURFACER

ESS-70 SURFACER

30 hp electric motor (complete with disconnect and VFD) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 70 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill. Infinitely variable track feed and cutterhead speed.

TRUCUT SURFACER

SS-96 SURFACER

35 hp Vanguard gas engine (complete with 6 gallon tank and fuel guage) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 96 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill.

TRUCUT SURFACER

ESS-96 SURFACER

30 hp electric motor (complete with disconnect and VFD) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 96 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill. Infinitely variable track feed and cutterhead speed.

TRUCUT SURFACER

SURFACER SEAT OPTION

The Surfacer Seat is designed to provide a comfortable place to operate the surfacer. With a seat and footrest you can ride along as the surfacer works, closely monitoring the finishing of your products. Controls remain within easy reach making your work comfortable and nearly effortless.

Basic Surfacer Specs

  • 19 inch vertical adjustment
  • 2 inch chrome cylinder rods
  • 1 ¼ inch Acme screw
  • Manual vertical adjustment in 1/64 inch increments
  • 3 inch chrome cylinder rod
  • Ball screw and linear bearing
  • Hydraulic drive motor
  • Hydraulic horizontal positioning
  • 90 gallon hydraulic reservoir, return filter, and sight temperature gauge
  • Hydraulic track feed
  • Hydraulically driven cutterhead
  • 2 x 4 box tube 4 post construction with extra bracing
  • Bronze track scrapers
  • Track lube reservoir with drip system and felt wipers
  • Custom 14 inch diameter 12 tooth carbide cutterhead
  • 16 inch diameter sanding head (tool less quick change)
  • Multiple track options available (Click for more information)

Surfacer Bits & Sanding Media

TRUCUT SURFACER

SURFACER PARTS/MEDIA

Surfacing Wheels and Bits are available from TruCutMills.com

TRUCUT SURFACER

SURFACER PARTS/MEDIA

Sanding Disks are available from TruCutMills.com