TRU-CUT
Sawmills & Surfacers

Tools that give you the Power to Create!

Tru-Cut Mills

TRU-CUT  Surfacer Planes and Sands!

Want to create extraordinary slabs for Bar/Cabinet Tops, Tables & Furniture?

The Tru-Cut Slab Surfacers are designed to bring production speed to the surfacing and sanding process. Slabs can be flattened (can remove up to 3/4 inch per 12 inch wide pass) and smoothed (finish comparable to the best planers) in no time. Sanding can be accomplished with nearly the same speed (14 inch wide passes). At feed rates of 10 feet per minute a slab can be surfaced while your customer watches (surfacing times of 5-10 minutes and sanding times of 10-20 minutes are possible). In addition the surfacers can share a track with one of our mills or run on it's own track.  Surface slabs in record time, minutes instead of hours. This is the Machine!

SS-70 Surfacer -

35 hp Vanguard gas engine (complete with 6 gallon tank and fuel guage) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 70 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill. Infinitely variable track feed and cutterhead speed.

ESS-70  Surfacer -

30 hp electric motor (complete with disconnect and VFD) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 70 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill. Infinitely variable track feed and cutterhead speed.

SS-96 Surfacer - 

35 hp Vanguard gas engine (complete with 6 gallon tank and fuel guage) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 96 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill.

ESS-96 Surfacer - 

30 hp electric motor (complete with disconnect and VFD) powered with double hydraulic pumps to power the cutterhead, track feed, and horizontal adjustment. Capable of surfacing and sanding in excess of 96 inches wide. Length is only limited by the amount of available track. Designed to operate on the same track as our mills allowing the Surfacer to share a track with a Mill. Infinitely variable track feed and cutterhead speed.

Basic Surfacer Specs:

  • 19 inch vertical adjustment
  • 2 inch chrome cylinder rods
  • 1 ¼ inch Acme screw
  • Manual vertical adjustment in 1/64 inch increments
  • 3 inch chrome cylinder rod
  • Ball screw and linear bearing
  • Hydraulic drive motor
  • Hydraulic horizontal positioning
  • 90 gallon hydraulic resevoir, return filter, and sight temperature guage
  • Hydraulic track feed
  • Hydraulicly driven cutterhead
  • 2 x 4 box tube 4 post construction with extra bracing
  • Bronze track scrapers
  • Track lube resevoir with drip system and felt wipers
  • Custom 14 inch diameter 12 tooth carbide cutterhead
  • 16 inch diameter sanding head (tool less quick change)

Surfacer Bits & Sanding Media

Surfacer Parts/Media

Surfacing Wheels and Bits are available from TruCutMills.com

Surfacer Parts/Media

Sanding Disks are available from TruCutMills.com

© 2020 TruCutMills.com and Dunlap Enterprises LLC - All Rights Reserved

Connect With Us